Keep your Apple Watch and iPhone close together. Open the Watch app on your iPhone and tap the My Watch tab. Tap Apple Watch, then tap Unpair Apple Watch. Enter your Apple ID password. How to use DoctorUnlock to bypass Activation lock on Apple Watch: Step 1. Open the website. Since this is an online Apple watch Activation Lock removal service, the first step is to go to the site on an internet browser. This is where the Apple watch iCloud lock bypass will be done – www.doctorunlock.net. Enter IMEI number.

• Apple Watch Problems
• Apple Watch Tips

by Anna SherryUpdated on 2020-03-13 / Update for Apple Watch

During the initial setup of the Apple Watch, Apple asks you to enter a PIN code, in order to secure the device. This is Apple's way of providing extra security for your expensive device, but it also means that you have to manually unlock the device each time you take it off your wrist.

But with time, users occasionally forget the password and they search all over the Internet asking 'I forgot my Apple Watch passcode, how do I unlock it?' Actually, unlocking of the Apple Watch is quite simple and it can be done very easily. There are 2 variants of the procedure and both of them are discussed in the article below.

Part 1: If You have Your Paired iPhone, Here is the Best Way to Unlock Your Apple Watch

The watch designed by Apple also comes with a passcode protection, similar to other devices manufactured by the company. But in certain instances it is possible for any user to forget the Apple Watch passcode but then a sense of panic takes them over as they are unable to get inside of their vastly expensive device. But that does not really fix the issue.

These are modern times and these leading companies are growing according to it, and such password issues are going on so that there is always built-in ways out for the users, if they ever stuck in such situations.

If you have your iPhone and you forgot Apple Watch passcode or forgot Apple Watch password, whatever you want to call it, the way out for you will be very simple. In order to remove the password you need to set up the Apple Watch again and restore from the backup.

Here's how to unlock an Apple Watch; you need to keep your Apple Watch and the iPhone together until the procedure is complete:

Step 1: You need to run the Apple Watch app and tap on 'My Watch' tab.

Step 2: After that, go to 'General' and tap 'Reset'.

Step 3: Afterward, tap 'Erase Apple Watch Content and Settings'; you have to tap again to confirm the command. It is possible that you will be asked for your Apple ID.

Step 4: Now, if you are suing Apple Watch Series 3 {GPS + Cellular} and Apple Watch Series 4 {GPS + Cellular} you will have the option to keep or erase your Cellular plan:

• If you wish to pair your Apple Watch and iPhone again then 'Keep Your Plan'.
• But if you don't want to pair your Apple watch again then you can 'Remove Your Plan'. If you are not going to pair with a different watch or a different iPhone, then you must contact your network provider to cancel cellular subscription.

Step 5: Which option you are going to choose is completely up to you but after that you simply have to wait and then set up your Apple Watch again. After that you can restore the device from a backup.

Part 2: If You haven't Your Paired iPhone? How to do?

On the other hand, if your iPhone is not paired, you can still unlock Apple Watch but the method is quite different. It is very easy to make Apple Watch unlock using the unpaired way, take a look. You need to keep your watch connected to the charger until the procedure is complete:

Step 1: Press and hold the Power button of your Apple Watch.

Step 2: Then, you the 'Power Off' Slider to turn it off.

Step 3: The, you will see the option to 'Erase All Content and Settings' on the screen, tap on it.

Step 4: Now, you just have to wait for the procedure to be finished. After that you will be able to set up your Apple Watch again, or even restore from a backup.

Part 3: How to Unlock iOS Devices Screen without Passcode

One of the best ways to unlock Apple Watch password or actually, any iOS device is to Tenorshare 4uKey. It is an excellent program, designed with excellence to unlock iOS devices without even using their respective passcodes.

Tenorshare 4ukey comes with multiple feature but the 'Unlock Lock Screen Passcode' option of the program is the one you need to use in order to unlock the devices. The procedure is very simple and easily operable, here' take a look:

Step 1: Download and install the program on your computer. You can use either PC or Mac, 4uKey is compatible with both of them. Upon launching the program you need to select the feature called 'Unlock Lock Screen Passcode' from the main interface.

Step 2: Now, connect your iOS device to that computer of yours. The program is supposed to detect the device automatically, after the detection click 'Start' to proceed.

Step 3: If your iOS device is having trouble getting detected by the software, you need to put it into DFU Mode or Recovery Mode, after it is connected to the computer with a USB cable. Doing it will make sure that your device gets connected, and you will be able to proceed.

Step 4: After the detection you will be asked to download the firmware package from the internet. Click 'Browse' to choose a path for the file and then click 'Download' to continue.

Step 5: After the firmware is downloaded you need to click 'Start Unlock' to being the removal process of your iOS device passcode.

The entire process takes several minutes, so you need to wait and keep the devices connected.

Step 6: After the passcode is removed successfully, you can set up the device as new or you can restore you iTunes/iCloud backup if you have one.

This program is effective on any iOS device that works with multiple version of iOS. On the top of that, the procedure is really simple, easily operable by anyone without even the basic knowledge of electronic device.

Conclusion

Hence, you got your answer to 'I forgot my Apple Watch password, how do I access it again?' The procedure is very simple; there are 2 variants which depend on the paired iPhone. But the best way to unlock any iOS device would be to use Tenorshare 4uKey. It is a third-party program but it works very efficiently, the procedure is simple enough. Highly recommended!

• Knowing how to connect your Apple Watch to Wi-Fi can unlock a whole host of new features.
• You can use an Apple Watch without a Wi-Fi connection or a paired iPhone, but you won't be able to receive messages, stream music, and more.
• You can connect your Apple Watch to Wi-Fi using the Settings app on your watch.
• Visit Business Insider's Tech Reference library for more stories.

To take full advantage of the many features of an Apple Watch, you must turn on Wi-Fi and Bluetooth on your paired iPhone.

How To Unlock A Used Apple Watch Strap

Online video editor easy. Below, we detail how to connect your Apple Watch to a Wi-Fi network, and which Apple Watch features are available with and without Wi-Fi.

Check out the products mentioned in this article:

iPhone XS (From $999 at Apple)

Apple Watch Series 4 (From $399 at Apple)

Apple Watch Series 3 (From $279 at Apple)

Why you need Bluetooth and Wi-Fi on an Apple Watch

The Apple Watch communicates with its paired iPhone using Bluetooth and Wi-Fi. It can also use a cellular network to stay connected, but only the most recent models have this feature (Series 4 and Series 3). The Watch switches between these options automatically to create the most power-efficient connection.

How to turn on Wi-Fi and Bluetooth on your Apple Watch's paired iPhone

1. Open the Control Center on your iPhone by swiping up from the bottom of any screen, or from the top-right of the screen on iPhone X models.

2. Tap the Wi-Fi and Bluetooth icons, which will be colored blue when turned on and gray when off.

If you don't have your iPhone nearby, there are still several things you can do with your Apple Watch, such as track workouts using the Workout app, listen to podcasts stored on Apple Watch, make purchases using Apple Pay and (of course) check the time. http://vjxucy.xtgem.com/Blog/__xtblog_entry/19291564-download-crossover-17-5-full-mac-crack-free#xt_blog.

With a Wi-Fi or cellular connection, this list expands to include sending and receiving messages using iMessage, checking the weather, streaming music, or listening to the radio.

How to connect your Apple Watch to Wi-Fi

1. Ensure you have watchOS 5 or later, and update your Watch if necessary. Viscosity 1 6 2 download free.

2. Open the Settings app on the Apple Watch (the gray gear icon).

3. What hard drive is in my macbook pro. Tap Wi-Fi. If you're already connected to a Wi-Fi network via your iPhone or otherwise, the network name will appear here.

How To Unlock A Used Apple Watch Series 3

4. If Wi-Fi is turned off (the slider is gray), tap the slider to turn it on. The Apple Watch will automatically search for networks.

5. Choose the network you'd like to join by tapping on it. An Apple Support article notes that the Apple Watch can only connect to 2.4 GHz Wi-Fi networks. It can connect to networks your paired iPhone has joined previously while connected to the Apple Watch via Bluetooth. Top free video editing software for windows 10. It won't connect to public networks that require a login or subscription.

Unlock Apple Watch From Phone

6. If prompted, enter the password for the Wi-Fi network using Scribble, writing the letters on the Watch screen with your finger. If you need to change a scribbled character, turn the Digital Crown to see more options (including uppercase, lowercase, and alternative letters similar in shape to the one you scribbled).

7. Tap 'Join.'

Can't Unlock My Apple Watch

Related coverage from Tech Reference: